Pin Punch
A punch that is flat on the end.
| Type | Part # | Supplier | URL |
|---|---|---|---|
| 1.0 mm | BERG-6745G-100 | Otto Frei | http://www.ofrei.com/page431.html#5285 |
| 1.1 mm | MSA10503-110 | Otto Frei | http://www.ofrei.com/page431.html#17587 |
| 1/16" | 565A | Starrett | http://www.amazon.com/Starrett-565A-Overall-Length-Diameter/dp/B0006J4KAG?tag=ifixitam-20 |
A pin punch is a tool which is used to insert or remove pins. Pin punches are normally used with a pin punch holder.
Shown in the image is a 1.1 mm pin punch. The wide diameter part is the shank, while the small diameter part is the pin. This punch comes with a 10.5 mm pin, which for some high-pressure installations of pins is too long: the pin bends when pressure is applied. You can always cut the pin down. I cut mine down to 1/4" or so, since my application requires a force of about 1/2 ton or so.
crwdns2931311:0crwdne2931311:0(69)
crwdns2944524:069crwdne2944524:0
