Insignia NS-CLOPP2 Troubleshooting

Press the "Volume +" button (furthest right button located on top of clock) to increase the volume if the sound is too quiet. If sound problems persist, consider replacing the speaker.

See Speaker Replacement Guide

Consider replacing the screen.

See Screen Replacement Guide

Check to see if the device is ON after making sure the device is plugged in to a power source.

Check to see if the power cord is damaged. Consider replacing or repairing the power cord.

Insert, or replace, the batteries.

See Battery Replacement Guide

Consider cleaning the buttons to remove any dirt or other debris that may have fallen in the cracks. You can use a pin or toothpick, or a Q-tip dipped in cleaning solution.

If stickiness persists, consider removing backing and observing the situation on the inside of the clock. Clean any internal debris you may see.

See Motherboard Replacement Guide

Make sure you are tuned in correctly to a radio station and are not simply tuned in to a static portion of the radio.

Adjust the antenna cord for FM stations.

Place the clock radio in a better location for AM stations.

Make sure the antenna cord isn't damaged.

Check to see if you have batteries inserted correctly into the back of the device.

See Antenna Replacement Guide