crwdns2862678:0crwdne2862678:0
crwdns2895503:0crwdne2895503:0
Hoverboard Has Flashing Red Light
The hoverboard will not operate despite charge and other functions working
Motor Circuits Are Causing Motherboard Malfunctions
When this occurs, a red light will flash 4 times. This means that internal circuitry of the motor is causing the wheel on the motherboard side to malfunction. This requires a full replacement of the motherboard side motor. Please view Hover-1 Liberty Gyroscope Sensor Boards Replacement.
Motor Circuits Are Causing Motor Malfunctions
When this occurs, a red light will flash 5 times. This means that internal circuitry of the motor is causing the wheel on the battery side to malfunction. This requires a full replacement of the battery side motor. Please view Hover-1 Liberty Wheel Motor Replacement.
Hoverboard Will Not Balance
The hoverboard does not remain upright when trying to mount.
Hoverboard Needs to Recalibrate
One common fix to an unbalanced hoverboard is to recalibrate the system. in order do this, stand the hoverboard flat on both wheels and hold the power button down until the LED lights start to flash. Wait two to five seconds and turn hover board off. Power on normally.
Hoverboard Has Loose Wires
The wires connecting the motor and motherboard may be loose. To check you will need to open the device and check the connections. Please view Hover-1 Liberty Bottom Cover Replacement.
Hoverboard Has a Broken Gyroscope
If recalibration does not work, then the gyroscopes in your hoverboard may be faulty. The red indicator light on the top of the hoverboard will flash 7 times to denote the gyroscope on the battery side is the issue or 8 times for the gyroscope on the motherboard side. Please view Hover-1 Liberty Gyroscope Sensor Boards Replacement.
Hoverboard Has a Faulty Motherboard
The last component that may be broken is the hoverboard's motherboard. A red indicator light on the top of the hoverboard will flash once to denote this error. Please view Hover-1 Liberty Gyroscope Sensor Boards Replacement.
Hoverboard Will Not Drive
The hoverboard wheels will not spin.
Hoverboard Has Loose Wires
The hoverboard may have wires that are not firmly connected to one another. Please view Hover-1 Liberty Bottom Cover Replacement to open the device and check the connections.
Hoverboard Has a Faulty Motherboard
If the connections are all secure, then the problem may be the motherboard. The red indicator light on the top of the hoverboard will flash once to denote this error. Please view Hover-1 Liberty Gyroscope Sensor Boards Replacement.
Hoverboard Has Something Blocking Magnets in the Wheels
If connections are all secure, then make sure to check the wheel interior for debris. To do this you will need to remove the magnetic turbine from the wheel. The red indicator light on the top of the hoverboard will flash 5 times to denote the wheel on the battery side is the issue or 4 times for the wheel on the mainboard side. Please view Hover-1 Liberty Wheel Motor Replacement.
Hoverboard Will Not Power On
The hoverboard shows no signs of powering up when the power button is pressed.
Hoverboard Not Charged
Make sure the board is charged. If the board has been charging for a long time but still wont power on. There may be an issue with the charger, or charging circuit. Please view the Hoverboard Will Not Charge or Hold a Charge section.
Loose Power Button Cable
Check that the power button cable is completely connected to motherboard. Remove the cover. Please view Hover-1 Liberty Bottom Cover Replacement. Then check that the wires connecting the power button are in good condition and connected to the motherboard.
Loose Battery Connection
With the external cover removed, check the the two large wires connecting the battery to the motherboard are in good condition and don’t have debris inside the connector.
Faulty Motherboard
If the hoverboard will still not power on, and the condition of the power connections is good. The motherboard may not be supplying power to the hoverboard. A red indicator light on the top of the hoverboard will flash once to denote this error. Please view Hover-1 Liberty Gyroscope Sensor Boards Replacement.
Hoverboard Will Not Hold a Charge
The hoverboard shows no sign of charging
Battery level codes:
GREEN: over 20%
YELLOW: under 20%
RED: under 10%
Faulty Charger
Plug the charger into the wall and disconnect the charger from the board. The charger light should be bright green. If there is no light, make sure the charger adapter is completely inserted into the charger brick. If the light stays off, consider purchasing a replacement charger.
Faulty Battery
If the light on charger is off when plugged into board, this could be a faulty battery or motherboard. A red indicator light on the top of the hoverboard will flash six times to denote this error. View Hover-1 Liberty Battery Replacement.
Faulty Motherboard
Light Stays green while board is plugged in, but the battery is not charged. A red indicator light on the top of the hoverboard will flash once to denote this error. View Hover-1 Liberty Gyroscope Sensor Boards Replacement.
To further troubleshoot your device, please visit the Hover-1 Troubleshooting and Support page.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team S13-G2, White Fall 2018 crwdns2935289:0Cal Poly, Team S13-G2, White Fall 2018crwdne2935289:0
CPSU-WHITE-F18S13G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:04crwdne2935297:0
crwdns2944067:048crwdne2944067:0
My daughters hover-1 will not move. Just got it for Christmas. Was working good the just stopped one side the lights stays on and smells hot. Will not power down. Please help
LaChele Wolfenbarger - crwdns2934203:0crwdne2934203:0
Same problem with my daughters as well. If you find a fix, please post.
Brian -
I found a site where it references light stats on on one side and does not power down. It stated that that side with the light on has a bad gyroscope that controls that side. It said it can’t be fixed and needs replaced. In my case, I’m returning tomorrow for another one and try our luck with that.
Brian -
Were any of you able to fix this problem? My daughters is having the same problem
Renee P - crwdns2934203:0crwdne2934203:0
Mine just lets me ride it for a second then beeps red even if I charge for 6 hrs straight. anyone can help?
Anna Black -
My daughter just got this hover board for Christmas was working good now it’s just a solid red light and won’t stop blinking I am so !#^&@@
Alexis brown - crwdns2934203:0crwdne2934203:0
Mine lets me ride it for two sec then beeps red even if I charge for 6hr straight
Anna Black -
Needs recalibration. Turn the hoverboard off. Keep it on flat ground balanced level. Press and hold the power button for 10 seconds. The board will beep and light up and continue to beep. Press power button once to power off. Then turn it back on and it should be fixed. My kids hoverboard was beeping constantly, red light on, not working and when it did it would go backwards. I recalibrated it and she's flying around my living room as we speak. It's a hover 1 board that came with a removable seat to ride on.
amber.roop -
My son got one for Christmas it worked fine and the he took it outside and accidentally got it in water. It will turn on but will not go. Please help.
Ginger
Ginger Ervin - crwdns2934203:0crwdne2934203:0
We fixed our daughters by opening it up and unplugging the battery. It started working again. She used it for a couple of days and now after we charged it it won’t power on. No lights at all. What a piece of junk!
LaChele Wolfenbarger - crwdns2934203:0crwdne2934203:0
My daughter got the liberty hover board for Christmas. Worked fine the first couple days. Now the green light is on and will not power off. It’s also making a slight humming sound and will not move.
Tara Pell - crwdns2934203:0crwdne2934203:0
My son got a liberty hover1 for Christmas today was only his 2nd time on it went to a friend's house tried to get on it to come back home the light on top is green but the LED lights wont light up and it want go I dont knw whats wrong with it I'm returning it for a differant one
Brina -
It just beeps when he steps on bur it want move at all and want light
Brina -
My high roller is beeping and it’s the green circle with the line in the middle how do I fix it
Angela - crwdns2934203:0crwdne2934203:0
My daughter's is doing the same. Green light on, won't move and keeps beeping
71sweetpea -
Our charger stays on green (the part plugged into the wall) suppose to be red then turn green when charged. Stays geeen the whole time and board is dead. Don’t think it’s charging brand new just opened for birthday. Rode about 20 minutes. Help
Heather Henry - crwdns2934203:0crwdne2934203:0
Got Hover-1 Liberty for my Grandson - Christmas Gift. It worked fine the first month and now there have been intermittent issues when it stops working and won’t shut off! Not matter how many times you press the power button. Then the wheel gets extremely HOT and does not spin. We put it outside in the cold because we’re afraid of it catching on fire. Battery dies outside, then we bring back in , recharge and it works for a bit and then the same thing occurs. No wonder they only have a 90 day warranty! This one is just about up. Sent a ticket in for help on Monday…have not heard a peep from the company! Guess we got some made in China junk again! Lucky for me, I opted for the 3 year warranty when I bought it. I’m thinking that’s the only way we’ll get our money back!
dsniscak - crwdns2934203:0crwdne2934203:0
Hello my board have one green arrow lighting up and it’s beep nonstop! I hold the power button for until the blue light flash and power it down! Then restart the board and still only one light turn on and board still don’t moves!!
Joann - crwdns2934203:0crwdne2934203:0
My granddaughter's went bad immediately as well! Walmart won't do anything about it. Neither would Hover-1…
Melanie Yocom - crwdns2934203:0crwdne2934203:0
My hover-1beast bleeping when charging is that suppose to happen.
scotty_howell - crwdns2934203:0crwdne2934203:0
My Hover-1 Liberty had a tilted tire so I opened the plastic housing and found that the plastic splines that support the axle had completely disintegrated to pieces. I don’t know if it was faulty plastic or it got overheated but it was only used one time by a little 80 lb girl. It was bought at a fundraiser auction so we have no idea where it was purchased. Can anyone advise me where I could send it to get it fixed or is it a throw away ?
rick.sweazy - crwdns2934203:0crwdne2934203:0
My daughters hover-1 liberty hoverboard has broken off, how do we fix this? Can we buy a new wheel mechanism?
Tabitha School - crwdns2934203:0crwdne2934203:0
My daughter charged her Hover board for 2hours and it literally drove for 10 seconds
bigzsep413 - crwdns2934203:0crwdne2934203:0
My son got a hover 1 board for Christmas and the one wheel is squeaking all the time after the first few rides. Only riden inside the house never even outside yet. Any help would be great. Thanks !
geegee_stinger - crwdns2934203:0crwdne2934203:0
hover board does nothing when power button pressed. Daughter was riding the go cart and it just died. Battery has full charge and the charger shows green..what the !&&*…only 2 months old and ridden very little
Richard Neff - crwdns2934203:0crwdne2934203:0
granddaughter was riding and it just died. Ran multimeter on battery..fully charged and charger shows green. Power button does nothing..whats up here…it is the gocart version
Richard Neff - crwdns2934203:0crwdne2934203:0
My hover board will turn on but when I go to ride it and press the black lever it completely shuts down the power and everything can anyone advise what to do? Thank you
Eve Wawrosz - crwdns2934203:0crwdne2934203:0
Hover 1 eclipse, will not power on at all, and when you plug the charger into it, the green light on the charger flashes green. Help, plzzzz
Christy McIntosh - crwdns2934203:0crwdne2934203:0
Mine shut off and won’t turn back on charged till red light on charger turned green and it still won’t turn on. My daughter got it for Christmas so it’s just past the warranty barely 4 months old
Michael Douglass - crwdns2934203:0crwdne2934203:0
My grandson’s Hove-1 Drive worked great for about 2 hours and now both feet pads somehow split from each other and moving on the own, where before they worked together.
Sent in a ticket but not a word from the Hover-1 people.
Sally Keith - crwdns2934203:0crwdne2934203:0
My son rode his 2x and now the system light comes on automatically and will not turn off. Ive reset the board multiple times. Purchased Friday May 29th 2020 first rode on my june 3rd 2020 for a total of maybe 30 minutes prior to the system light turning on.
baby_blue_eyes_08 - crwdns2934203:0crwdne2934203:0
Hello! My sons got this huver-1 for Christmas and already doesn’t work! Is not the battery since we have a second One at home and tried that charger. It just stopped working and now when plugged it shows a full charge but doesn’t turn on. Please help??? He is very sad
Adrian - crwdns2934203:0crwdne2934203:0
Having trouble with my sons board holding a charge, it’ll charge, we will unplug when charger light shows green and then is dead after maybe 15 minutes of use…ideas on what might be wrong?
Jessica Anderson - crwdns2934203:0crwdne2934203:0
My grandson has only had this Hover Board for 1 month ,now trouble has started. Runs for about 5-10 minutes and shuts off . I have went through all the trouble shooting to fix ,but same thing over and over again. Very dissatisfied with the Hover Board -1 and the price that we paid for it .
Jerry Jones - crwdns2934203:0crwdne2934203:0
My right pad on the board is incorrectly leveled. It’s not leveled to the floor so when I try to stand on it when it’s upright it full speeds backwords. It can’t stand upright nor turn to the left.
RAZOR - crwdns2934203:0crwdne2934203:0
Hi, my daughter got the hover rocker 1 for Christmas, it stopped working on one side after about 10 days, I returned and got a new one on Friday and the same thing has happened?
Michelle Dripps - crwdns2934203:0crwdne2934203:0
My daughter has a Hover 1 turbo and it starts spinning out of control for no reason at all. It has happened 3 times. She has only had it for less than 1 month. Now she’s afraid to get back on it. What is wrong with it? How do I reach the someone to figure it out. I have called the number on the manual and can’t get through to anyone and the website doesn’t have my hover 1 turbo listed.
Rachel - crwdns2934203:0crwdne2934203:0
Needs recalibration. Turn the hoverboard off. Keep it on flat ground balanced level. Press and hold the power button for 10 seconds. The board will beep and light up and continue to beep. Press power button once to power off. Then turn it back on and it should be fixed. My kids hoverboard was beeping constantly, red light on, not working and when it did it would go backwards and crazy. I recalibrated it and she's flying around my living room as we speak. It's a hover 1 board that came with a removable seat to ride on.
amber.roop -
My sons hoverboard is making a weird humming noise and when he goes fast it sounds like loose bolts rattling
Lindsey Mercier - crwdns2934203:0crwdne2934203:0
can’t talk to no one about the hover-1 Eagle throttle won’t workFurmon Davis - crwdns2934203:0crwdne2934203:0
The left side of the hoverboard where the wheel is it feels like there’s something loose like a light or something. It’s really loud when I try to ride it I feel like I breaking it. How do I fix it?
Emma Lawson - crwdns2934203:0crwdne2934203:0
I own three and they are a blast I jump mine and I've never had a proublemyes.ripe the front wheel apart loose wires I fix mine all the time
Johnny Vernoy - crwdns2934203:0crwdne2934203:0
My son road hover blast through water and it's not charging or anything. What can be the problem?
Joshua Etherton - crwdns2934203:0crwdne2934203:0
One red X blinks and beeps continuously, board just vibrates if you try to move it.
curtisgray357 - crwdns2934203:0crwdne2934203:0
My son's hover board comes on wen I hold it upside down. The moment I try to put it right side up nd it's 90'.... It switches off. How do I sort this out?
Michael Munton - crwdns2934203:0crwdne2934203:0
my hoverboard leans when I get on it and it keeps pushing me off. can someone help?
savege - crwdns2934203:0crwdne2934203:0
i need to buy a motherboard for hover -1 (rtdk201904300773) do you have a one?
amoneir - crwdns2934203:0crwdne2934203:0
I HAVE A CIRCUIT SHORT ON THE MOTHERBOARD AND I LOOKING FOR Power MOSFET SVT078R0NT TO-220 88A68V ANYONE CAN HELP AND HE HAVE THE SAME MOSFET I NEED TOW
amoneir - crwdns2934203:0crwdne2934203:0