The release cable is detached from the release mechanism and I can’t open the bonnet to rectify this. How can I open the bonnet? 1995 Jaguar XJ8 sport.

2003 Jaguar X Type 3.0 Automatic AWD; I put the car in reverse, neutral, and drive and can feel it engage and see it on rpm gauge but movement. I put it back in Park and get a noise for a short bit that sounds like it is rolling as it goes into Park and noise stops. I can still push car forward and backwards even though it's in Park ? Help Thank You . . .

i have a 03 jaguar s-type, 3.0. can't get check engine light to go off after many repairs and restricted performance keeps popping up.

My XF 2010 interior lights and back lamp not working and one is getting fused when installing.

This issue for me after replacement wiper motor

Starts fine when cold but when warmed up it needs to crank a long time before starting but then runs fine. I replaced the front pressure regulator and injectors and it had no affect on it starting when warmed up. Otherwise the car runs great. What can I check next?

in 87 jaguar xk8 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

2002 Jaguar X-Type AWD has the hood/bonnet stuck in the locked position. The interior release lever will release the passenger side but the driver side will not budge. Removing the driver side wheel well liner and turning the steering wheel all the way to the right reveled some things that allude to the possibility of a manual method to release the hood that doesn't require any cutting or drilling through the hood and making things much worse and costly. Any help would be great, as I have exhausted myself online, and watching YouTube videos of this particular problem in languages that are just too much to understand, and video quality that's lacking aren't helping. To put it mildly.

apps not installing on iso 9.3.5 what is its solution

Two friends who own GT400's: 1. 1996 Chevrolet K1500 4WD Suburban; and 2. 1999 Chevrolet K1500 4WD Suburban. They are wondering about options for larger tires corresponding suspension lifts. Specifically, they are looking at the following three tire sizes: 1. 255/75R-17; 2. 285/70R-17; and 3. 285/75R-17. QUESTIONS: 1. What suspension lift is required for each of these three tire sizes? 2. Will a 4" suspension lift work for any OR all of the three tire sizes? 3. Is any inner or outer fender well trimming required for these three tire sizes and a 4" suspension lift? 4. Is a body lift required in combination with the 4" suspension lift? If so, 1" or 2" body lift? 5. Are torsion bars and or drive shaft modifications required? 6. Any other modifications required for the above mentioned tire sizes and 4" suspension lift?