Insignia NS-24ER310NA17 Troubleshooting

How do you fix alamp or light secsor

How do u the fix lamp or light sensor

Tv turns black after 5 minites what can i do it has audio

My screen has have normal and the other half is doubles and blurry

My TV is on but won't show any picture but when I hit the guide to my dish it shows also there is no sound

TV comes on, and I did a power reset……I put in the channel I want, then the screen goes black. No sound either. Did a channel scan as well.

However, adds do come on for channel 1150 etc, again without sound.

Tried & TV won't reset makes a whirring sound when I turn off power. Anyone out there who is able to help with this

Asking for a PIN to watch any shows. I rest the PIN still won’t work

55”insignia looping on blue start up screen tried reset button

Hdmi2 worked fine last 2 nights, now I can't get it with remote or buttons on side of TV. Already unplugged the one hdmi cable and tv for 20 minutes and nothing changed

Just replace your remote

remote will not turn tv must turn on with remote then press the AV button on tv

I can’t clear the message “USB device was removed “ the menu button changes the message to be in a PHOTOS box. Nothing else works

We had a storm and the color is not correct. We have gone to settings and then tint and can’t get to the blue color. We have either red or green tint. When we add red then faces are red. We can add green and things are too green. We have reset and it goes to -0- between the red and green, then we have to add red. Trees and grass are rust-looks like they are dead or dying.

Any help is appreciated. We have forgotten what real color looks like. We are not at home at this time and email would be better to connect as we do not have internet connection at home.

thanks

Screen is stuck on the choose language and will not move. I did the power reset and still it goes to the language page and won’t move

My tv picture does not cover the entire screen. It shows a smaller screen with black all around it

Model 55d510NA17 rev c Igsinia won't turn on just went flash and turn to off as soon I i push the power on do I need a some kind of fuse to fix it

Got 55 inches insignia red light turn but don't won't turn on no pic just flash and black out is there anyway that can be fixed

I need to learn how to use the remote. No instructions with tv. Please tell me where I can download these instructions please

i reset the tv now it will not let me Select a language. the tv is frozen at that point.??howbdo i fix it?

I did the power reset 3 times but it not showing the picture even tho the light it green and everything is connected properly

menu settings keeps flashing while watching tv Tried to factory reset that didn't work

tv showing setting icon that all

Where is the outlet for earphones?

I hear sound and I see the picture for 2 seconds. Then the screen begins to recycle the full screen colors of black, then the screen goes white, then red then blue then green. The colors recycle over and over non stop. Help?

My tv is on can not see noting or hear noting

Remote or tv does not start television . Removed power from tv and rebooted as instructed. Red light on tv turns on and clicking sound from tv occurs. Then nothing. Help please

Mine will turn on but is still saying choose your language. What do I do

Trying to watch a video, the HDMI1/DVI DVD keeps stating Mode not supported. I have already tried resetting.

i want to watch my tv but it comes for a few minites and the it disappers for minutes then come back on

my picture come on but does not stay on but for a few minities then it comes back on and does the same thing how do I fix it so that I can watch TV all day

The power reset worked to restore the sound on our tv.

The power reset restored the sound on our tv.

I need help, my model is NS-RCFCA-19, my TV keeps freezing on the home screen. I cannot open an application and it also keeps opening and closing on the home page and keep bringing me back to the amazon page and when i try to connect it says a problem has occurred

Remote is not working.

My tv. Does not work just the red light turns blue when you press the power button.what do I need to fix ?

My red light blinks every 2 seconds. It does not stop blinking. I unhooked everything and hook it back up, I have unplugged the TV and held down on the power button and later the input and volume and every other suggestion everybody comes up with. I still cannot get my TV to power on. anybody have a clue or a idea?

What should I do when the remote enter button doesn't work and the TV stuck stuck on English

How do I adjust the volume without the remote which is lost

My new 24” smart Insignia tv will not connect to my Bell slimline remote. A window poops up from default settings asking if I want to turn off ( yes / cancel)

This stopped the Bell remote from completing it's programing. How do I turn OFF that feature?

My insignia tv just dimmed on its own

I have tried everything multiple times still no signal.

If you have a device that is being powered by the built in USB port on the tv, it could be taking too much of the power. Try unplugging it and see if the tv will power up. This happened to me and it turned on like normal when I unplugged the USB.

Video is distorted on hdmi. There is a vertical line going through the main picture and colored bars appear below the surface.

My tv won't pick up the hdmi it says no signal but when I look at the hdmi in the input it has it highlighted

No picture shows but you hear voice

Remote turns tv on/off but does nothing else.

When I plug my Insignia tv Model- 49D420NA18 it turns on by itself, but there’s only a irregular lines visible on the screen. No picture, no sound. what seems to be the problem? Please send me some information on my email address. Thank you- fmkimchi@yahoo.com

My tv Insignia Model 49D420NA18 when I plug it in, it automatically turn-on but no picture no sound. It is showing a irregular lines, what seems to be the problem with it and what cause this thing to happen. Maybe it was “Made in China”. please send me some information how to fix this problems on my email “fmkimchi@yahoo.com”

Using my hot spot from my phone. the mac address is showing zeros how do I change it ?

Home screen is blurry and can’t see any options

What do I do getting static Noise on what I’m watching

I just got a used insignia without a remote and I don't have cable. How do I use my hotspot on my phone on my tv

I disconnected my Insignia TV from cable (bought a new tv) and I plug it in and does not turn on.

tv wont connect tp wifi

My Insignia tv keeps cutting off and on

Tv is coming on but no sound

Tv worked fine, not everytime turned on black screen with TEST SCREEN showing. Have done all the reset, unplug suggestions. Reads available channels via antenna but won't open. Onle black screen with TEST SCREEN. Any ideas?

Tv runs fine except shuts off amplifier when commercials are on.

Will not pick up digital signals

Run auto channel's search will not pick up digital signals

The TV comes on but I cant change the Inputs

a loading screen stays on the screen and doesn’t let me do anything I’ve tried wait it out but it’s been doing it all day I tried unplugging it waiting and still doesn’t work what do I do

Is it possible that it needs a fire stick put on the back of the tv

My 19” insignia stopped working the red light is gone I have unplugged it and plugged it back in and the red light still missing. I don’t even know what happened

good pictures but sound is often fuzzy

Why does the audio not match the mouth movements?

My tv is showing that I am critically low on storage

I have not added any apps since I've had it.

I deleted all the preset apps and it still says the same thing.

I cannot watch it with that screen showing on it.

What do I do?

Hi,

I have purchased new TV and tried in multiple power outlet but no power in TV and even no red light whereas out electronic device working perfectly. Any suggestions.

Regards,

Manish

I have a white box in the middle if the screen that doesn’t go away. Anybody else ever had this problem?

Will not scan channels because the word “channel “ will not highlight.

Will not scan because channel settings will not “highlight “

When I turn off my Insignia Smart TV is turned off and then back on my Google remote stops working. (The TV works fine) And I loose contact with my casting device.  (Chrome Cast is pugged into a wall socket).

mine just briefly flashes the home screen ……then nothing

Wat about when you turn the tv on it comes on, pic looks great then the screen goes black but the tv stays on wat could be wrong with it.

Why are there no responses to any questions?

Why are there no responses to questions?

My TV went blank and showed please wait, what can I do to get it to come back on

I have an Insignia TV the red light comes on but it won't come on what's wrong with it please help

My Insignia Roku TV will not show anything on the Roku channel or any other channel. It only shows cable channels. How do I fix this?

I attempted to rescan my tv, but, using arrow buttoms, skips over category "channels". I've rescanned several times in the past and it worked. Note...New non-smart 32 in. 720 Insignia purchased 12/31/22.

Insignia 32in 720...non-smart purchased 12/31/22. Unable to scan...arrow keys jump over "channels" on the remote menu. I've scanned several times before this incident. I've tried three different remotes, from previous Insignia tv's and get the same result.

no power cord

This sucks, their is variable wifi connection options in my apt. I checked on my phone and my friends phone, hell, I even got a portable wifi thing-a-majigie from the local library, but this insignia Roku t.v ain't picking up none of them, why? Ughhhh! About to launch it out the window and wire a negative report. Help!!!!!

All the channel station say information currently unavailable

My insignia amazon tv will not detect the remote after a factory reset? I have tried many videos on youtube and none of them worked. After I preformed a factory reset the screen just says searching for remote and never detects it, I changed the batteries out and put new ones in.

Tv se prende y apaga y no responde al control, no se puede apagar

No enciende

Pero se escucha