To remove the pump and reservoir, follow this:

Remove the windshield washer reservoir filler neck.

Raise and support the vehicle.

Remove the right-hand fender splash shield

Remove the washer reservoir.

Disconnect the electrical connectors.

Pull off the hoses.

Remove the windshield washer pump with rubber gasket

Disconnect the electrical connector.

Disconnect the hoses.

Lift out the pump.

Vehicles with headlamp washer system

Remove the headlamp washer pump and rubber seal.

Disconnect the electrical connector.

Disconnect the hoses.

Lift out the pump.

Installation

NOTE: When installing the reservoir, the filler neck must be inserted using Vaseline.

To install, reverse the removal procedure.