The Logitech sticker on the bottom of the mouse is sensitive to heat and crumbles easily. If you want to keep that sticker intact, apply as little heat as possible and remove the sticker carefully.

If you don't want to remove the sticker all the way, you can puncture it with a screwdriver where the two screws are located beneath it.

Heat an iOpener and apply it to the Logitech sticker for one minute to soften its adhesive.

Alternatively, you can use a hair dryer on the Low heat setting to soften the adhesive.

If you're using a hair dryer, only heat the sticker a few seconds at a time or you may warp the plastic shell.