crwdns2915892:0crwdne2915892:0
This guide shows you how to replace the motherboard of your Huawei P8 Lite.
crwdns2942213:0crwdne2942213:0
-
-
Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.
-
-
-
There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool.
-
When all clips are open, remove the back cover from the rest of the phone.
The back panel is really really easy to brake, be careful :)
In my mobile phone the back panel was kept in place also from 2 strips of bi-adhesive tape. Pull gently to detach it to remove the panel.
right. it has 4 strips of adhesive tape
To facilitate the detachment of these double-sided tapes, I recommend heating with a hairdryer along the edges of the back cover, especially at the four corners.
Nicola -
-
-
-
Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.
The 4 screws wich hold down the lower part of the loudspeaker are Torx screws for me. But it's a French Huawei, doin' nothing like the others :)
Die Wasserschadenindikatoren sitzen unter dem Mainboard. Bei den Aufklebern auf den TORX handelt es sich um Garantiesiegel.
Danke für den Hinweis, wurde so übernommen.
pour dévisser les vis cruciformes, quel taille de tournevis faut il? svp
Bonjour, il vous faut un tournevis ou un embout cruciforme #00 pour dévisser une vis cruciforme #00. Bonne réparation !
-
-
-
Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.
-
Remove the three silver Phillips #00 screws which hold down the upper part of the loudspeaker.
-
-
-
-
Remove the three Phillips #00 screws that hold the metal plate in place.
-
Remove the metal plate with a tweezer.
-
Unplug the battery flex connector with a spudger.
-
-
-
Remove the two Torx T5 screws.
-
Remove the five Phillips #00 screws.
-
-
-
Carefully pry off the plastic cover on the left side. The NFC antenna contacts might be slightly glued to the cover.
-
Then remove the top cover.
An der Linken Plastikabdeckung sind die Kontakte dran geklebt!
EN: The lateral small plastic piece is sticked to the flex of the side buttons. Take care
-
-
-
Remove the SIM card and SD card trays.
-
Disconnect the three plug connectors and one ZIF connector.
-
-
-
Remove the volume and power button cable.
-
Take out the motherboard by lifting the bottom part first.
-
To reassemble your device, follow these instructions in reverse order and apply adhesive where necessary.
To reassemble your device, follow these instructions in reverse order and apply adhesive where necessary.
crwdns2935221:0crwdne2935221:0
crwdns2935229:010crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Tobias Isakeit - Repairability Engineer crwdns2935289:0Tobias Isakeit - Repairability Engineercrwdne2935289:0
Business
crwdns2934841:01crwdne2934841:0
crwdns2935297:01,132crwdne2935297:0
crwdns2947410:01crwdne2947410:0
My p8 lite is not connecting to mobile networks unless im in town onyl whats the prob
El celular no tiene ese tipo de tapa es como sellada, que debo hacer para saber si es por la pila que no agarra carga porxa
maguada1106 - crwdns2934203:0crwdne2934203:0
Wenn man langsam langsam arbeiten und vorsichtig ist, dann kein problem gibt es.Ich hätte keine Problemen zu öffnen.Das ist sehr leicht.
Athanasios Georgopoulos - crwdns2934203:0crwdne2934203:0