crwdns2942213:0crwdne2942213:0
-
-
Lay out your mouse and gather your tools.
-
-
-
Use metal spudger to lift sticker
The wireless version has two (2) more screws under the other two (2) small circular pads.
-
-
-
Using a phillips #0, unscrew the screws
-
-
-
-
Applying some force lift the mouse top up and backward at the same time to disconnect it
-
-
-
Once inside pull on the scroll wheel to remove it from the board
-
-
-
Pull on the cable and the board should come out
The wireless version has yet another small Philips head screw holding the main board to the base.
-
-
-
Then pull out the plastic at the bottom
In the wireless version there is also a slider under the main board that engages with the battery (AA size) isolation switch.
-
-
-
All done just follow guide in reverse to reassemble
-
crwdns2947412:02crwdne2947412:0
The wireless version of this mouse has 2 extra screws under the other two small pads and arranged differently because of the battery compartment intrusion into available space. There was also a small screw retaining the circuit board.
Scroll not working
