Section: Troubleshooting the Washer Pump

1. Reinstall the Original Control Board:
   The original board only had a drainage issue. Reinstalling it can help determine if the new board is causing additional problems.
2. Check the Drain Pump:
   Since the pump is new, ensure it’s properly installed and functioning.
3. Inspect Wiring and Connectors:
   The issue may be in the harness or connectors between the control board and pump. Look for damage, loose connections, or corrosion.
4. Manual Access:
   Navigating the manual online requires selecting page numbers below the document box. To download, you’ll need to register on the website.

Let me know if you need further help!