Assuming the TUB IS SPINNING but does not get the water out of your clothing…

– Make sure the washer is programmed to the correct wash cycle, different cycles have different speeds!

– Make sure the drain hose on the back of the washer is not clogged or bent.

– Check that the drain hose on back of washer is positioned correctly in standpipe and is able to drain properly.

– Check the drain pump debris filter or coin trap, objects may be blocking the water flow.

– Check inside drain pump and all hoses connected to drain pump for foreign debris or small pieces of clothing.

– Be sure the wash load of clothing is balanced, balance out the wash load if you see all clothing to one side.

– Check washer belt to be sure it is not stretched out or damaged. (for most top loaders)

– Check direct drive motor coupling system to be sure there is no visible damage. (for most front loaders)

– Lid switch or door lock assembly may be damaged or bent and not making the electrical safety “connection”.