Then insert the stainless steel diffuser that you cleaned earlier.

The slotted side with the water channels should be facing down. Therefore, you will not be able to see the water channels when the diffuser is installed correctly.

Install the new screen.

We highly recommend against using the old screen. It can be almost impossible to get perfectly clean because it has two layers.

Now put the screw in nice and tight. Use a 8mm socket wrench to do so. The screen should flex downward toward the grouphead when tightening the screw.

Congratulations! You have finished the repair.

We will be happy to hear about your experience! Please share it with us on our Facebook pagehttps://www.facebook.com/pages/Kanen-Cof... Thank you!