My glider came with a little thingie on the end of the brake line (shown in the last picture). If you want it to look 'original', this is how it is done.

Bend the line like in the first picture

Bend again and go back around the lines approx. 5 or 6 times.

Put the end of the line through the loop at the end and pull tight carefully

If you are finished with this guide! Please do a symmetry check on your glider BEFORE you go flying the next time! You can check brake line symmetry with the other - yet untouched - side of the glider and compare the length - especially the position of the brake handle.

Also make sure that no line is tangled BEFORE flying the glider. You can do that by kiting (ground handling) the glider in moderate winds!