crwdns2875948:04crwdne2875948:0 —



Now, lift from the right side the board, and be careful, below is the LCD connector.

It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun

I don´t have any photo of the proccess, so I´m sorry for that. You must heat all the LCD area, and with special attention on the top and bottom areas.

Please be careful with the 2 lower buttons, they have this orange flat cable!!

As you can see, the LCD is totally destroyed, but it was broken before, so...