Use a spudger or a clean fingernail to flip up the locking flap on the four ZIF connectors—this is the unlocked position.

Use tweezers or your fingers to gently pull each cable out of its socket.

Try pushing on alternating sides of the CMOS battery connector with a spudger to disconnect it from the socket.

If that doesn't work, use a pair of tweezers to firmly grip the sides of the connector and pull straight away from the socket. Hold the tweezers closer to the connector to get a better grip.

To disconnect the display connector, first, gently push the tip of a spudger under the metal buckle to unclip it, then swing it over the socket.

Next, hold the buckle and cable together and gently pull the connector straight out of its socket.

Use the point of a spudger to push on alternating sides of the power connector to "walk" it out of its socket.

Don't pull on the wires or you risk damaging the connector and device.