Use a spudger to flip up the locking flap of the ZIF connector.

Use tweezers or your fingers to gently pull the bronze-colored ribbon cable out of its socket.

Use a spudger to flip up the locking flap of the ZIF connector.

Use tweezers or your fingers to remove the small black ribbon cable from the socket.

If the cable has a pull tab, use it to grip the cable. You may damage the cable by gripping it directly.

To reconnect, make sure the locking flap is flipped up and gently reinsert the cable. Then, flip the locking flap down to secure the cable. The cable should slide into the socket with little to no force. If you're having trouble, remove it, check that the flap is fully unlocked, and try again.