Make sure the small locking flap on the screen ZIF connector is flipped up before reconnecting the screen.

Hold the screen slightly below the bottom edge of the frame and align the screen cable with its socket on the motherboard.

Use angled tweezers to grip the pull tab on the neck of the screen cable.

Angle the cable so it's lined up and parallel to the socket, rotating the tips of the tweezers as necessary to get the right angle.

The end of the cable needs to be parallel to the motherboard—not angled downward.

Gently insert the connector into the socket until the white line meets the body of the socket.

If the connector doesn't smoothly enter the socket, realign it and try again.

Use your finger of the flat end of a spudger to flip the locking flap down to secure the cable.