Keep a firm grip on both the display and main body of the MacBook. Either half can fall unexpectedly during this step.

Push both halves of the MacBook together so that the hinge brackets can be lifted clear of their recesses in the chassis.

Push the main body of the MacBook away from you while pulling the display toward you to separate it.

Remove the display assembly, being careful not to snag it on any cables.

During reassembly:

Install the hinge screws loosely and adjust the display until each hinge is centered. Finally, tighten down the screws.

If your display clicks or snaps when opening or closing, loosen the hinge screws and adjust the alignment. Make sure the display assembly doesn't sit too far forward, or it can catch on the chassis edge when opening and closing.