Gently lift the motherboard at the bottom, and begin to slowly and firmly pull it down towards the bottom of the device.

Do not attempt to lift the motherboard any higher than necessary to just barely clear the frame. Lifting it higher can cause the delicate antennas to break.

If necessary, you can use the flat edge of your spudger to lift the motherboard just enough to get a grip on it.

Continue pulling with steady, even strength to remove the antennas from their sheaths. The antennas may be stubborn and not want to move easily. Simply continue applying steady and slow pressure.

Do not attempt to pull too hard, too fast, or you could break the delicate antennas.

Once the antennas give, pull straight out until the motherboard is completely removed from the device.