Remove the screen.

During reassembly:

If you replaced the screen, check the front-facing camera hole on the screen and remove any remaining protective liners in it.

Remember to reinstall the display cable bracket.

This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone and disconnect the screen.

Follow this guide if you're using custom-cut adhesives for your device.

Follow this guide if you're using a pre-cut adhesive card.

If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.