|
Introduction |
If your HP B210a has a clogged printhead, this guide will '''potentially''' resolve the problem and get the printer working again without new parts, or a replacement printerreplacing it with materials you have at home. This guide is specifically geared towards the HP B210a and similar printers. '''With how HP 564 printers are designed you can take the steps from this model and carry it over to any HP 564 printer. It can be 4 or 5 color and it will be the same procedure, except the printhead initialization bypass in some cases. HOWEVERIf you are trying this on a printer that does not match what was used, compare it to the guide and see if it's any different. If it isn't you have anything less thenare probably fine.''' Photo Black is not a major difference, so this is not an issue that will change how you remove the B210a I would suggest looking up how to remove it from an outside source as a precaution if anything looks different, with the exception of a 5th cartridgehead. You should also be aware any bypass steps may or may not carry overare free to anything else,try the bypass either. You can certainly trybut I have only validated it on the C309g and B210a at this point in time. I have not validated it on anything else, but it should work on most of them.
'''This method does not fix every printer with
Whilethis problem. I did method has a high fix rate, it'snot intend it 100%. It never was intendedto, be and I itnever will. be' This is something you can use if you don't want to use the internal cleaning tool to avoid making it worse or to recover a clogged printer the cleaning tool didn' t fix. Some problems can never be fixed.Consider this a last ditch effort to avoid scrapping the printer if you can, ot an alternative to the firmware tool if you would rather not make the problem worse.
Some background on this printer I used: I got this printer from the trash, because I wanted something that was going to be extreme but also has the lowest chance of being non-fixable at the same time and a trashpicked printer fit the bill.. '''How you see it in the pictures is how it started(pretty much every single nozzle was clogged and it didn't have ink tanks) and how it ended(a usable printer for free).'''
I am still not going to say this is 100% effective, but it salvaged a trashpicked printer. It's your best option when all else fails. |
|