|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| TicWatch Pro 3 GPS Battery Replacement |
|
|
Introduction |
| Use this guide to replace the battery in your TicWatch Pro 3 GPS. | | | ***For your safety, discharge the battery below 25% before disassembling your phone.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. | | | You’ll need replacement adhesive when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating. |
|
|
Time Required Min |
crwdns2931287:035crwdne2931287:0
|
|
Time Required Max |
crwdns2931287:050crwdne2931287:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | During reassembly, apply new adhesive where it's necessary after cleaning the relevant areas with isopropyl alcohol (>90%). | | | For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]] after completing this guide. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/TicWatch+Pro+3+GPS|TicWatch Pro 3 answers community] for help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|