|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| Samsung Galaxy A3 (2017) Display Replacement |
|
|
Introduction |
| Use this guide to replace the display in your Samsung Galaxy A3 (2017). | | | Opening the Samsung Galaxy A3 (2017) will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''', but will '''loose its water-protection'''. | | | This guide instructs you to replace only the display while leaving the original frame, logic board, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. | | | The process of separating the display from the frame usually destroys the display, so don't follow this guide unless you intend to replace the display. | | | You’ll need '''replacement adhesive''' to reattach a new display and the back cover when reassembling the device. |
|
|
Time Required Min |
crwdns2931289:01crwdne2931289:0
|
|
Time Required Max |
crwdns2931289:01crwdne2931289:0
|
|
Difficulty |
Difficult
|
|
Conclusion |
| If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone. | | | After reapplying adhesive, follow these instructions in reverse order to reassemble your device. | | | The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the mid frame. Align the screen and press it into place. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|