|
Introduction |
If your Xbox One controller has LT/RT issues (or needs manual adjustment), the issue may be due to the magnets. Use this guide to take the controller apart and re-secure the LT/RT magnets. | | | == Guide warnings == | | * '''''TO AVOID MELTING THE PLASTIC FRAME WHEN INSTALLING HEATSHRINK TUBING, ADJUST THE LIGHTER/TORCH TO THE LOWEST RELIABLE IGNITION POINT.''''' | ** '''''If you use a butane torch, test the setting you are going to use on something you do not mind damaging BEFORE working withon the controller. Use ABS to practice.''''' | | * '''''Holding the flame once the heatshrink seals may damage the controller frame.''''' | | * '''''This is a final solution. Be prepared to write the controller off if this does not fix the problem or makes it worse.''''' | | * '''''This fix is specific to Model 1537/1697 controllers.''''' | | * '''''This procedure WILL VOID ANY PRESENT WARRANTY. Make sure the warranty is expired if you care about preserving it!''''' | | ** '''''My controller is 17 months old. It is long out of warranty.''''' | | == Guide notes == | | * '''''This does not apply to Model 1708 controllers''. ''These controllers have fewer problems.''''' | | * If you misalign the magnets, you may need a controller frame. Use caution when applying glue. |
|