| == Guide warnings == |
| * Be prepared to write off your controller if this fix does not work as it may make the problem worse. '''This problem is not found on Model 1708 controllers.''' |
| * '''WARNING:''' The plastic frame can be melted if the flame is held too long or the flame is too hot. '''Only hold the flame until the heatshrink seals.''' |
| * '''This procedure will VOID ALL WARRANTIES. Make sure the warranty is expired or you cannot use it. My controller is 17 months old.''' |
| == Guide notes == |
| * This fix does not apply to Model 1708 controllers. These are not as unreliable as Model 1537/1697 controllers. |
| * If you misalign the magnets, you may need to replace the controller frame. Use caution when the glue is applied. |
| * When the heatshrink tubing is replaced, be careful not to burn or melt the controller frame. |