|
Introduction |
| If your Xbox One controller has LT/RT issues, the issue likely lies with the magnets. Use this guide to take the controller apart and secure the magnets so they do not move again. This can also be used to fix the magnet sensitivity if your controller needs adjustment. | | == Guide warnings == | | * Be prepared to write off your controller if this fix does not work as it may make the problem worse. '''This problem is not found on Model 1708 controllers.''' | * '''WARNING!:''' The plastic frame can be melted if the flame is held too long or the flame is too hot. '''Only hold the flame until the heatshrink seals.''' | | * '''This procedure will VOID ALL WARRANTIES. Make sure the warranty is expired or you cannot use it. My controller is 17 months old.''' | | == Guide notes == | * This fix does not apply to Model 1708 controllers. These are not as failure proneunreliable as Model 1537/1697 controllers. | | * If you misalign the magnets, you may need to replace the controller frame. Use caution when the glue is applied. | * The magnets are covered inWhen the heatshrink tubing. When you replace the heatshrink is replaced, be careful not to burn or melt the controller flameframe. |
|