crwdns2915892:0crwdne2915892:0
Use this guide to replace a cracked or broken screen on your Galaxy Watch.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.
-
-
-
Use an opening tool to get between the back cover and the metal housing of the watch.
-
Carefully pry the plastic back cover open.
-
-
-
Lay down the watch and lift the back cover to access the sensor connector on the motherboard.
-
-
-
-
Use a spudger to disconnect the sensor flex cable from the motherboard.
-
-
-
Use a spudger to disconnect the display flex cable from the motherboard.
-
-
-
Lift the core unit out of the housing.
-
-
-
If necessary apply some tape over the display to avoid any injury from glass shards.
-
-
-
Use your finger or thumb to steadily push down on the display to loosen the adhesive.
-
Remove the display.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
crwdns2935221:0crwdne2935221:0
crwdns2935229:09crwdne2935229:0
crwdns2935287:0crwdne2935287:0
Tobias Isakeit - Repairability Engineer crwdns2935289:0Tobias Isakeit - Repairability Engineercrwdne2935289:0
Business
crwdns2934841:01crwdne2934841:0
crwdns2935297:01,145crwdne2935297:0
crwdns2947410:01crwdne2947410:0
Hi does this process work with the galaxy 5 watch?
