crwdns2915892:0crwdne2915892:0
Use this guide to replace a broken or cracked display of your Samsung Galaxy A5.
crwdns2942213:0crwdne2942213:0
-
-
Switch off your phone.
-
Use an iOpener to soften the glue on the edge of the display. Concentrate on the sides first and then on the bottom part.
-
With an iSclack or a suction handle you can lift the display a little bit to get in the gap with an opening pick.
-
-
-
When the glue is loosened enough on the side you can lift the display a little bit more to get underneath the display with an opening pick.
-
Take a second opening pick and work your way around the bottom edge.
-
Repeat the last step and this one on the other side.
-
-
-
-
Grab the iOpener once again to heat up the bottom and top part to further soften the glue.
-
Now you will be able to move the picks at the bottom closer to the home button and eventually open the display towards the top.
-
-
-
In the top right corner you can find the connector of the display. Use a spudger to unplug it.
-
Now you can remove the display.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:070crwdne2935229:0
crwdns2947412:09crwdne2947412:0
Is this guide applicable to all A5 Models?
This guide is for the 2015 version. For other version see Samsung Galaxy A
plz plz plz tell me i have a screen of a5 2015 can i fix it on a5 2017 or 2018 outer look is same on both . can i?
Probably not. They’re completely different. You should also ask that at the 2017 guide as well
Devnol -
Unfortunately, the display are not compatible between the different models.
Can an Admin remove the “patrol” note? I accidentally deleted all the steps in the new snapshot whilst trying to edit it.
Done ;)
We denied your edits to keep the steps.
Do you mean the screen itself won’t fit to the phone or are there different connectors and compatibility issues? I’m trying to just get to my phone (leaked, no display visible anymore) with another screen to be able to copy my data off it. Could I use any other than the specific model screen for that?
The copper sheet under the panel was separated, can it be fixed?