crwdns2915892:0crwdne2915892:0
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
crwdns2942213:0crwdne2942213:0
-
crwdns2931653:01crwdne2931653:0 Safety precautions
crwdns2944590:01crwdnd2944590:04crwdnd2944590:0crwdnd2944590:0crwdne2944590:0
-
-
Place wheel chocks against the roller and rear wheel to prevent the machine from moving.
-
-
-
Flip the gas shutoff switch next to the motor to the left into the off position.
-
-
-
Grab the plastic housing at the end of the spark plug wire.
-
Pull firmly to disconnect the wire from the spark plug.
-
-
-
-
Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the left side of the machine.
-
-
-
Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the right side of the machine.
-
-
-
Slide the cutter blade out from under the machine to remove it.
-
-
-
Use a 1/2 inch socket to remove the 130 mm-long bolt securing the chain guard.
-
-
-
Carefully tilt the sod cutter on its side.
-
Use a 9/16 inch socket to remove the nut securing the chain guard.
-