crwdns2915892:0crwdne2915892:0
Use this guide to remove or replace the back cover on your Motorola Edge (2022).
Before you begin, download the Software Fix app to backup your device and diagnose whether your problem is software or hardware related.
You'll need replacement adhesive to complete this repair.
crwdns2942213:0crwdne2942213:0
-
-
Heat an iOpener and apply it to the back cover's right edge for two minutes.
-
-
-
Apply a suction cup to the back of the phone, as close to the middle of the right edge as possible.
-
Pull up on the suction cup with a strong, steady force to create a gap between the back cover and the frame.
-
Insert an opening pick into the gap.
-
-
-
Slide the pick along the right edge to slice the adhesive.
-
Leave the pick in the bottom right edge to prevent the adhesive from resealing.
-
-
-
Apply a heated iOpener to the back cover's bottom edge for two minutes.
-
-
-
Rotate the pick around the bottom right corner to slice the adhesive.
-
-
-
-
Slide the pick along the bottom edge to slice the adhesive.
-
Leave the pick in the bottom left edge to prevent the adhesive from resealing.
-
-
-
Apply a heated iOpener to the back cover's left edge for two minutes.
-
-
-
Rotate the pick around the bottom left corner to slice the adhesive.
-
-
-
Slide the pick along the edge to slice the adhesive.
-
Leave the pick in the top left edge to prevent the adhesive from resealing.
-
-
-
Apply a heated iOpener to the back cover's top edge for two minutes.
-
-
-
Rotate the pick around the top left corner to slice the adhesive.
-
-
-
Slide the pick along the top edge to slice the adhesive.
-
-
-
Lift the back cover from the phone and remove it.
-
To reassemble your device, follow the instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow the instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
crwdns2947410:01crwdne2947410:0
Where can I find the rear cover to replace it with? Mine is spiderwebbed.