crwdns2915892:0crwdne2915892:0
Follow this guide to replace the spark plug on a Mi-T-M heater model MH-0190-0M10.
crwdns2942213:0crwdne2942213:0
-
-
Flip the power switch into the OFF position.
-
Unplug any extension cords from the included power cord.
-
-
-
Use a 5/16 inch socket or Phillips screwdriver to remove the eight screws securing the upper shell, four on each side.
-
-
-
-
Lift the upper shell straight up off of the machine to remove it.
-
-
-
Grab the spark plug wires by their boots and pull firmly to disconnect them from the spark plug.
-
-
-
Use a 5/16 inch socket or Phillips screwdriver to remove the bolt securing the spark plug.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.