How to Use Suction Tape

Measure the length of tape you want and mark it with a pen. Consider the following:

You need enough tape for the Anti-Clamp's suction cups. Don't leave gaps, or the cups won't stick.

Don't use too much tape so it folds over your phone's edges. This may interfere with the opening procedure.

Use scissors to cut the tape to the desired length.

Repeat the measuring and cutting procedure for each piece of tape required.

Peel the tape off its plastic liner.

Apply the tape to the panel of your device where you'll attach the Anti-Clamp.

Use the flat end of a spudger, or your finger, to completely secure the tape to your device.

Use a spudger to press out any large bubbles.

Repeat the tape measuring, cutting, and applying process for the opposite side of your device.

You're now ready to open your device!

Follow this guide for general instructions on how to use the Anti-Clamp.

Choose which panel of the device you don't want to open, and the following steps will show how to secure it.

Measure the length of tape you want and mark it with a pen. Consider the following:

You need to leave room for the Anti-Clamp's suction cups—don't place tape under them, or they won't stick.

Use enough tape to ensure a good hold on the panel you don't want to open.

Peel the tape off its plastic liner.

Use scissors to cut the tape to the desired length.

Repeat the measuring and cutting procedure for each piece of tape required.

Apply the tape to the edges of your device nearest to where you'll attach the Anti-Clamp.

Fold the tape onto the panel you don't want to open.

Use your fingers to press down the tape and firmly secure it to your device.

You're now ready to open your device!

Follow this guide for general instructions on how to use the Anti-Clamp.