crwdns2942213:0crwdne2942213:0
-
-
Unplug from all cables
-
-
-
unscrew two Phillips screws on each side of the BCD3000
-
If the screws sit too tight, you can use the extension for better torque
-
-
-
unscrew another two Phillips screws on each side
-
-
-
Lift the upper control part.
-
Disconnect the cables by walking them out of their sockets.
-
-
-
-
Disconnect the two cables from the lower section to the connector board.
-
-
-
Slide the lower section to the front.
-
Now you can lift it and take it aside.
-
-
-
Disconnect the separate boards.
-
Now you can take the modules out by unscrewing them from the case.
-
-
-
The jog wheels on the front panel can be taken off by using a spudger and levering them out.
-
-
-
The knobs can easy be removed just by pulling.
-
-
-
Same goes for the knobs on the top section of the front panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Tobias Isakeit - Repairability Engineer crwdns2935289:0Tobias Isakeit - Repairability Engineercrwdne2935289:0
Business
crwdns2934841:01crwdne2934841:0
crwdns2935297:01,132crwdne2935297:0
crwdns2947412:02crwdne2947412:0
Pensaba que serviría para la BCD2000… pero es algo distinta.
great stuff, with better quality pictures would be better
