storm knocked power out

Hi @justme152, sorry to hear about that, does the power cable to the printer come with a fuse? had you tested with another one?

before proceeding next for more troubleshooting, and if you are unsure on what to do, contact a friend or someone who knows about it as you need to work with some live voltages.

else you need to dismantle the printer to the power supply module, measure with a multimeter on the DC output of it to check if there are any voltages. This to ensure that your power supply module is not faulty.

if the power supply is busted, you can consider repairing it or hopefully get the replacement module from ebay, etc.

note to check the internal logic board too, sometimes, it might be corrupted or defective.

Read the above link in detail. Unplugging 15 minutes, remove paper tray, hold on/off down while unplugged to clear who knows what and plug in while holding power button has worked 2 times for me. Totally ridiculous to have to ‘reset’ this machine after a Power outage. I can see if it remained off, but at least be able to press the power button to start, not run a marathon of different maneuvers.