crwdns2862678:0crwdne2862678:0
crwdns2895503:0crwdne2895503:0
Ninja BL663CO won't turn on
No matter what you do, you can't get your Ninja BL663CO to turn on.
Blender is not receiving power
Ensure that the blender is plugged into a functional power outlet.
Parts are out of place
If the blender is receiving power but will not work, it is most likely that one of the components is out of place. If this is the case, the red power light will blink continuously. First, check that the arrow on the lid is pointing toward the arrow on the handle and the handle is locked in place. Next, make sure the pitcher is screwed into the base securely. If the blender still wont work and the power light continues to blink, check that the blades are in place and are not obstructed.
Lid won't come off
If your Ninja BL663CO lid won't come off, make sure to fully depress the release button at the top of the lid. Once the lid handle is released, pull up firmly on the handle.
Liquid in the seal
If the lid is still stuck, it is possible that fluid has gotten into the rubber seal that is on the inside of the lid, causing the lid to stick stick very tightly. In this case you may have to apply additional force or insert a thin item such as a butter knife or flat-head screwdriver between the lid and the pitcher, in order to break the vacuum seal.
Unresponsive buttons
If the buttons on your Ninja BL663CO won't work, ensure that the blender is plugged in, the power is turned on, and the components are properly aligned.
Electrical problems
If you are certain that the blender has power, indicated by the red power light, you may have to replace the buttons on your blender or the motor base.
Ninja BL663CO doesn't blend efficiently
Why are there are still large chunks of ice after blending?
Damaged Blades
If your smoothies are not a smooth as they used to be, your blades may be damaged and will need to be replaced. See Ninja Professional Blender 1100 watt Blade Replacement
Blades don't spin
Blades are out of place
If the blades are not spinning when you activate your Ninja Professional blender, make sure that the plastic blade housing piece is positioned correctly and properly seated on the gear shaft.
Blocked Blades
If the blades are in place but still won't spin, they may be blocked by objects such as ice or frozen ingredients that are packed too tightly. You may have to empty the contents into a separate container and add them in small amounts.
Stripped Gears
When you try to blend something and hear a high-pitched whine. It may be due to a stripped gear. You will need to inspect the drive gear inside the pitcher where the blades attach. If the gear appears to be damaged, you may have to replace your pitcher.
Plastic flakes in your drink
Worn out blade housing
While enjoying your blended refreshment, you notice that there are pieces of plastic in your drink, it could be that the blade housing is worn out. Check the the plastic piece that contains the blades while your blender is turned off. If the bottom of plastic piece is worn, it will have to be replaced. See Ninja Professional Blender 1100 watt Blade Replacement.
crwdns2944067:032crwdne2944067:0
Can't get blades to fasten back into blender
Theresa nichols - crwdns2934203:0crwdne2934203:0
How can I obtain a new rubber band for the individual blender? Mine leaks when blending . It is the Ninja 1100 professional series
Kelly Hugh - crwdns2934203:0crwdne2934203:0
Hello.... am wondering why don't my ninja is not turning on... the power button is just blinking.. and it's like New
Evelyn Vela - crwdns2934203:0crwdne2934203:0
10 sec ago made a dragonfruit smoothie had same problem for the big blender atch. and the small blender atch. RED BLINK FIX! its a satay blink meaning where the big blender and the littler blender actually connect like the threaded look real close the put in these buttons they are tiny and black. What happens is you don't clean it properly and liquid or some sore of sugar gets into those buttons an if all the buttons which there is at least three I believe for each big and little blender use rubbing alcohol used nail polish and a q tip to kind of soak the buttons then with something firm such as a flat head or butter knife press the buttons ALL OF THEM up and down and work them back to getting LOOSE . FIXED! ....Now make sure when your done pay extra attention to those spots when storing they must be cleaned. its a pain but not if your 6 yr old chops his face in half and fingers these tings are powerful I LOVE MINE NO PROBLEMS at all except that...which I blame half on me and ninja ...HOPE IT HELPS
MetalPhotography -
I cannot snap or lock the mini blender
Umer Hasan - crwdns2934203:0crwdne2934203:0
Release button fell out
leakevalerie - crwdns2934203:0crwdne2934203:0
The blender just wont turn on, now i have had it for a little over 1 year and obly uses it about 10 times how does this happen. Where can i get it fixed
Shamika - crwdns2934203:0crwdne2934203:0
Am I supposed to press down and then turn? I think I ruined it. Because I tried to press it back up and it won’t do….and it doesn’t turn and click I have to hold it….
Victoria
vcki1 - crwdns2934203:0crwdne2934203:0
Hi I’m having the same problem, the blades in both large cup containers won’t spin but the single serve cup spins well, I have to blend everything in smaller portions in the single serve container , please somebody help
John Ramirez - crwdns2934203:0crwdne2934203:0
Hello
my daughter put the pitcher onto the base incorrectly and now it won’t come off! She put the handle at the back and of course it would not lock into place but I can’t get it off the base either. What do I do???
Cynthia Lyons - crwdns2934203:0crwdne2934203:0
The blender is set up properly. The power turns on properly. Dough and Pulse buttons work properly except blend and crush.
Mar Fig - crwdns2934203:0crwdne2934203:0
The pro 1100 has stripped gears inside the motor housing after two years. How do u fix it?
NPHall
Nick Hall - crwdns2934203:0crwdne2934203:0
my Ninja pro system 1100 stripped the gears off the motor inside the Ninja blender motor housing how do I get it replaced or repaired.
This occurred after two years of use.
Nick Hall - crwdns2934203:0crwdne2934203:0
Hello I have a unique situation where the gears in the bottom of the pitcher are still fine. For example with the pitcher locked on the base with no blades and a lid it works. Then if I remove the pitcher and put the blades on I can still spin it by hand without the lid on. My issue is that the gear like structure on top inside of the lid seems to be strpped. I hold the blade housing to the top of the lid it goes into and it part on top of the lid that should spin is just locked in place. Are there any ways to help loosen up the gear hosting inside the lid to allow it to spin?
Robert Lamm - crwdns2934203:0crwdne2934203:0
This is a piece of crap. Only used it 3 times. The blades wont spin. Never never will I buy their products again. Big waist of money. Going in trass.
lindatcb77 - crwdns2934203:0crwdne2934203:0
The blades will not spin. This is a piece of crap. Never never will I ever buy their products again. Only used 3 times. What a big waist of money. Have 1100 pro system.
lindatcb77 - crwdns2934203:0crwdne2934203:0
Blade spins when empty. If I add 4 ice cubes it just sits still. What is the best way to fix it?
Darla Bey - crwdns2934203:0crwdne2934203:0
My Ninja won't blend on the smoothie setting. All the other buttons work. But when I push the smoothie button nothing happens
Lauri Mathes - crwdns2934203:0crwdne2934203:0
This product is actually the worst blender I’ve ever owned DONT BUY!
Jake Hoogmoed - crwdns2934203:0crwdne2934203:0
I have a Professional 1500 Watt purchase with all components and my 7 cup just snapped off the bottom and I can no longer use it on my blender. When I purchased this it was a life time warranty but not sure if that is available anymore how do I get this replaced/fixed
Angela Pasquini - crwdns2934203:0crwdne2934203:0
Got a professional 1500 Watt blender with all attachments my 7cup pitcher lost the base to connect to blender fell right off
Angela Pasquini - crwdns2934203:0crwdne2934203:0
Blade spins when empty. If I add anything to it, it just sits still. What is the best way to fix it?
Priya Sunki - crwdns2934203:0crwdne2934203:0
I dropped my ninja base and now the power won't come on. What I can do? I use it nightly and really can't buy another one right now.
Shannon - crwdns2934203:0crwdne2934203:0
My Ninja will not blend!! I have followed all the trouble shooting hints. All parts were properly in place. The blade had no interference. I always thoroughly clean my appliance after use. The red light is not flashing, but all the white buttons are. I am very unhappy with this. How can I return it for a refund?
Judy - crwdns2934203:0crwdne2934203:0
fill up glass pitcher quartwe way blender starts but dont see anythin turning inside glass rosemary cataldo
Rosemary Cataldo - crwdns2934203:0crwdne2934203:0
Anyone able to build back the rubber material or use another material on the face gear on the base part of the interface where the pitchers interface? The sawtooth base gear rubber has mostly worn away and everything else if OK seems. Was thinking maybe Plasti-Dip or something heavier duty polymer adhesive that dries to smooth solid surface. Maybe even ABS dissolved in acetone and building the material up using that? Any thoughts or can that be replaced and I'm not finding online how to yet?
James Finch - crwdns2934203:0crwdne2934203:0
Wondering if can 3D print using TPU or possibly like the painting on PlastiDip to build up and possibly repair the material. Maybe also can use ABS paste or slurry or paint made with ABS dissolved in acetone to repair and build back up the mating teeth?
James Finch -
My power nutri blender 3 in one is not coming up.what could be the reason? Because this is my second time of using it
Joy - crwdns2934203:0crwdne2934203:0
Is everything installed correctly? Per Google AI: To turn on a Ninja BL663CO blender, press the power button until the LED icon illuminates. Then, add ingredients, starting with liquids, followed by fresh fruits, leafy greens, nut butters, and powders. Finally, add ice or frozen ingredients. To blend, press the start stop button, and the blender will blend for 30 seconds. To stop the program, press the start stop button again. To turn off the unit, press the power button.
James Finch -
I just got this 3 in one blender not up to a month.what should I do.
Joy - crwdns2934203:0crwdne2934203:0
Power light is not coming up
Joy - crwdns2934203:0crwdne2934203:0
Le falta el candadito de seguridad se puede conseguir
Eduardo Ramírez y - crwdns2934203:0crwdne2934203:0