crwdns2862678:0crwdne2862678:0
crwdns2895503:0crwdne2895503:0
Bluetooth Is Not Connecting
The controller’s bluetooth will not connect to your console.
Bluetooth Receiver Not Connecting
If your console says your controller is not connected by Bluetooth, use this guide to ensure you connect it correctly.
Compatibility Issues
This controller is only compatible with Switch, Android 8.0 or above, iOS 13 or above, and Windows 7/10 or above.
Buttons/Joystick Do Not Work Properly
The buttons/joystick will not work after extended use.
Stick Buttons
If there is dirt build-up in the buttons’ crevices, then the buttons become sticky. In order to unstick them, use a cotton swab with rubbing alcohol to clean the crevices of the buttons.
Buttons/Joystick Have Fallen Off Due to Overuse
If the buttons or joystick on your controller have fallen off, use this guide to help you replace it.
Device Is Not Charging
The device does not charge after being plugged in
Charging Port is Broken
If you have double-checked to make sure you have plugged your cable in correctly and your controller is still not charging, you will want to then check the charging port on your controller for any dirt in it. You will want to use something small like a toothpick or paper clip to clean any dirt that is in your port.
Charging Cable is Broken
Check your charging cable for any damage. If your charging cable is damaged, it is time to purchase a new cable.
LED Lights Have Gone Out
The LED lights no longer come on after turning the controller on.
Lights Have Died
If the lights on your controller will not come on, try replacing the lights with this guide.
Loose Connection
Your LED lights may have a loose connection in which you will want to make sure all of the lights are tightly twisted in their slots.
Battery Is Not Holding A Charge
The battery dies quickly.
Battery is Dead
If the lithium battery of your controller will not hold a charge, then it is more than likely dead and should be replaced. This guide will show you how to change it.
Part of Controller is Refusing to Turn Off, so the Battery Drains
First, you should use the device’s charger on another device to make sure it is the battery that is the problem. If the charger is working, then something in your controller is draining the battery. You will need to check if your controller has a firmware update. If there is, you should update and check your battery again.
crwdns2944067:016crwdne2944067:0
My RT QND LT dont work can you help
Mario Blanco - crwdns2934203:0crwdne2934203:0
My RT QND LT work can you help me
Mario Blanco - crwdns2934203:0crwdne2934203:0
Que "potenciómetro joystick" sería el reemplapzo del que tiene el mando gamesir T4 Pro y como se realiza el cambio del mismo?
JOSE ANTONIO R P - crwdns2934203:0crwdne2934203:0
Mi problema si alguna me ayudar es que hace 2 días jugaba normal en la Switch y de la nada se desconecto y ya no conectaba más lo quise conectar con el cel y tampoco salía el dispositivo pero no sé podia conectar para nada así por ende pienso q algo pasa con la conexión inalámbrica como lo soluciono gracias
Anonimo Kezuo - crwdns2934203:0crwdne2934203:0
Hola, tengo un problema, el mando me llegó ayer y lo estuve jungando con dead island 2 en epic game, el mando hace cosas raras como atacar, saltar y algún que otro movimiento sin yo hacer nada, quizas sea porque no funciona bien con el launcher epic games?
joel miranda - crwdns2934203:0crwdne2934203:0
Hola, siento las molestias, pero, ¿Has podido encontrar alguna solución?
orihimetifa -
The left dpad only changes audio. I can’t get it to just work like a button.
Neogears -
when i press RB and LB at the same time, it turns off the controller and when i reactivate it, its suddenly android mode.
Dionh - crwdns2934203:0crwdne2934203:0
Lo quiero para jugar al mobile legends y no se como mapear los botones y el shootingplus v3 no me funciiona ni se por que
Aida IA - crwdns2934203:0crwdne2934203:0
Hola me compre un joystick Gamesir T4 pro y estoy teniendo problemas de conexion, cuando lo conecto a la pc va bien despues lo quiero usar con el celular y conecta pero al volver a conectarlo a la pc éste no conecta nunca, hago la conbinacion de botones correcta pero no pasa nada
mateo grether - crwdns2934203:0crwdne2934203:0
Hola alguien sabe como resolver el problema de los botones LB y RB no funcionan
Adrian Aguilar - crwdns2934203:0crwdne2934203:0
I got a GameSir T4 pro controller for my son to play on his tablet, it hooks up and working for the most part but the right joystick is the issue. Up is down and down is up and very sensitive as well. Is there a work around this
Brian - crwdns2934203:0crwdne2934203:0
My T4Pro's RB Button does not work with the Switch, forcing me to map the RB button to something else. It works fine on PC (though I sometimes have to turn off Steam's controller system, or it doesn't work with certain games like Monster Hunter: World).
Michael Smart - crwdns2934203:0crwdne2934203:0
has anyone noticed that without touching the device, the controller will select items on the screen? (like as if the a button is being pressed?). the button isn't stuck down - any ideas as to what may be happening?
Kosta Deligiannidis - crwdns2934203:0crwdne2934203:0
Después de jugar por un rato. Ya no funciona el A. Igualmente q el botón posterior asignado para ese botón! Después de un rato salta solo y se mueve solo.. Al rato vuelve y funciona normal... es muy frustrante
Odracico Estoico - crwdns2934203:0crwdne2934203:0
Hi! I have been using this for Super Mario Kart 8 and Super Smash Bros. and sometimes the joystick selects items without me touching the button, and even when the controller is on the table (and I'm not even holding it). It's not a stuck button. This even happens with the joystick portion - not touching it and it moves. For example, in the character selection of super smash bros., it might be on the table, it drifts and selects a character, all without me touching the controller. it happens randomly
Kosta Deligiannidis - crwdns2934203:0crwdne2934203:0