crwdns2933423:0crwdne2933423:0

crwdns2942561:0crwdne2942561:0

crwdns2862678:0crwdne2862678:0

crwdns2895503:0crwdne2895503:0

Motor will not start

No matter what you do, you can't get your vacuum to turn on.

Power switch is not turned on

Make sure you have pressed the power switch into the on position.

Check the socket

Plug a different device that you know is working into the socket to make sure the socket is okay.

Vacuum does not clean carpet

You keep going over and over the same spot, but you still can't pick the dirt up off of the carpet.

Full dust cup or clogged filter

Empty, clean, or see Eureka AirSpeed Bagless Zuum Vacuum Washable Filters Replacement guide to replace the dust cup filter.

Faulty hose or valve assembly

Make sure air path selector know is turned to the floor setting and there is not a blockage in the hose.

Worn, cut, or out of shape belt

To replace a worn or cut belt, see Eureka AirSpeed Bagless Zuum Vacuum Belt Replacement guide to replace the belt.

Incorrect carpet height setting

Turn carpet height selector to another setting.

No suction at the end of hose

You try and clean the baseboards and corners, but the hose won't suck up any cobwebs.

Full dust cup or clogged filter

If filter is clogged beyond cleaning, see Eureka AirSpeed Bagless Zuum Vacuum Washable Filters Replacement guide to replace the filter.

Faulty hose or damaged hose

If the hose is damaged, see Eureka AirSpeed Bagless Zuum Vacuum Hose Replacement guide to replace the hose.

Vacuum is hard to push

Even on hardwood floors, you struggle to push the vacuum.

Worn, cut, or out of shape belt

If the belt is damaged, see Eureka AirSpeed Bagless Zuum Vacuum Belt Replacement guide to replace the belt.

Burning smell

You begin using the vacuum and something smells like burning rubber.

Brush roll will not turn

If the brush roll will not turn, see Eureka AirSpeed Bagless Zuum Brush Roll Replacement guide to replace the brush roll.

Celina Burchett

crwdns2935283:010/13/14crwdne2935283:0

1,122 crwdns2915208:0crwdne2915208:0

crwdns2935297:08crwdne2935297:0

crwdns2915084:0crwdne2915084:0

Clemson, Team 2-2, Benson Fall 2014 crwdns2935289:0Clemson, Team 2-2, Benson Fall 2014crwdne2935289:0

CLEM-BENSON-F14S2G2

crwdns2931471:04crwdne2931471:0

crwdns2935297:018crwdne2935297:0

crwdns2944067:028crwdne2944067:0

Won't start, electrical outlet is good, there is power. New bag, no dirt around switch, no breaker flipped, power cord is intact. Still won't start. Now what?

7ohnnyramone - crwdns2934203:0crwdne2934203:0

My vacuum is brand new. I have used it once. Today as I vacuumed it just randomly shut off and now it will not turn back on. Any ideas why and what needs to be done??? Power outlets are good and I have checked everything with the vacuum. Like I said its brand new!

Jennifer - crwdns2934203:0crwdne2934203:0

Same as the others. The vacuum stopped running and will not come back. Less than 3 weeks old. AVOID BUYING THIS PIECE OF CRAP!!!!

Not That Guy - crwdns2934203:0crwdne2934203:0

Same as others too. Ours is fairly new. Won't come back on. VERY frustrating since we thought were upgrading and getting a better vacuum.

jakewaits - crwdns2934203:0crwdne2934203:0

Same problem brush wont turn and shouts down and wont come back on for a half hour,I checked the belt it was ok,So i fixed it i put it in the trash no more problem.PS IT WAS ONLY USED 2 TIMES .Dont buy a Eureka AirSpeed Bagless sweeper

cross571 - crwdns2934203:0crwdne2934203:0

Same problem!! It just shut off one day and wouldn't turn back on only one year old! Checked the socket and of course it was turned on. Don't buy. A piece of junk. Also the attachment to the hose fell off after two months!!

lisahamilton32 - crwdns2934203:0crwdne2934203:0

I ran my vac with too dirty of a filter. The motor shut off. Heard of a thermal switch to prevent motor from siezing. Does the airstream gold have such a feature?

lindseyoldham - crwdns2934203:0crwdne2934203:0

Have had this vacuum since 2012 with no trouble. Doing a maintenance cleaning right now. Always clean the filter and empty dust after every use. Love it.

mstephens8654 - crwdns2934203:0crwdne2934203:0

The vacuum part won't work. It seems to pick up everything but after moving it around for awhile it just basically dumps what I just picked up. Another thing, it doesn't vacuum my rug anymore, just picks things up and spits them out right away. The hose part works great. I tried to unclog the vacuum part and thought it was unclogged but still doesn't do what I want it to do and what it used to do. This vacuum is only a few months old...

Kristin M - crwdns2934203:0crwdne2934203:0

same.here. Bought at. Xmas not over used. Find out anything ?

Sue young -

Did you ever find out what the problem was? Mine is doing the same thing. The hose will suck but not on the floor.

linda.lytle66 -

My Vacuum all of the sudden just stopped working, it won't turn on. Does anyone know what the problem could be???

Holly A Meyers - crwdns2934203:0crwdne2934203:0

Did you recently clean and empty all the filters and dust containers? I would double check that you have the inner plastic filter properly attached to the funnel-looking part, because otherwise it might be blocking the airway. I had this happen to mine and I think it caused the motor to overheat and didn't discover it until after I think I caused the motor to overheat. I just hope I didn't totally fry it.

Madison Donnelly -

Ours has been running with a really hot cord then today it did shut off like that. I took it apart and found white dust caked on the roller. I can only think this is carpet pet powder. Once I cleaned up the whole inside everything runs great

Debbie McVegan - crwdns2934203:0crwdne2934203:0

My vac is making a load noise but sucks any ideas?

Tammy Cardinal - crwdns2934203:0crwdne2934203:0

My vac is making a load noise but is sucking ?any ideas?

Tammy Cardinal - crwdns2934203:0crwdne2934203:0

Mine too making a loud noise only if brush roll engaged. But it works. No idea why?

Bijay Yerra -

I am having great difficulty moving the dial to move it from floor suction to tool suction. Any suggestions how to fix this? Thanks.

Deby Daly - crwdns2934203:0crwdne2934203:0

me too; did you ever get answer?

christinabrink -

do not, i repeat, do not waste your money on this vacuum cleaner!! it is made to cost more problems than what you paid for it!! i suggest you invest in a “bissell" !!! have one for over 30 years and the “only” problem i have with it is the belt wears out once every two years!!!

this vacuum is a waste of money and time!!!!!!!!

Geneva Pace - crwdns2934203:0crwdne2934203:0

Everytime I buy a eureka vacuum they suck. I will never waste my money on another one. I had it a week and it stopped working. I empty it and keep it cleaned Everytime I use it and it still won't get the job done.

sheliahdavidson17@gmail.com - crwdns2934203:0crwdne2934203:0

This may sound ridiculous, this happened to me today and I looked inside it and nothing was wrong. I got upset and kick the back of it and it started working again

Nic - crwdns2934203:0crwdne2934203:0

I cannot get the roller brush to stop. Totally love this vacuum otherwise. Gotta keep it clean i know.

Betty Craven - crwdns2934203:0crwdne2934203:0

EVERYTHING Is CLEAN And CLEAR… NO SUCTION!

martin moffitt - crwdns2934203:0crwdne2934203:0

This is my 2nd one I bought this vacuum a week ago and it spits everything right back out

Quis - crwdns2934203:0crwdne2934203:0

unable to turn the air path selector knob- help

Marg Rose - crwdns2934203:0crwdne2934203:0

Help- unable to turn the- air path selector knob !!!!

Marg Rose - crwdns2934203:0crwdne2934203:0

crwdns2917038:0crwdne2917038:0

crwdns2936625:0crwdne2936625:0:

crwdns2936751:024crwdne2936751:0 2

crwdns2936753:07crwdne2936753:0 4

crwdns2936753:030crwdne2936753:0 18

crwdns2942667:0crwdne2942667:0 36,708