DigiLand DL801W Troubleshooting

No matter what you do, you can't get your DigiLand DL801W to turn on.

Before delving into the guts of your DigiLand tablet, make sure that the power button on the side of the device isn't stuck.

If your tablet won't turn on, especially if it has not been used recently, you may simply have a drained battery. Plug your tablet into your computer or AC adapter and see if anything happens. Ideally, your tablet will recognize it has been connected to a power source and charge its battery. If it will no longer charge, the battery may be damaged.

It is possible that it appears nothing is happening because the display is bad. If you hold the tablet up to your ear and are able to hear sounds or vibrations but nothing appears on the display, it is possible that the display is damaged and needs to be replaced.

If your tablet does nothing when plugged into a computer, the problem most likely lies in the motherboard.

Whenever you push the power button, the device does not change behavior.

Check the wiring connection from and to the power button.

Use an air can to flush out any debris inside the power button assembly.

Your device turns on and appears to work, but when you plug in headphones or speakers, the audio doesn't play properly.

It's unlikely your headphones or speakers are faulty, but it's worthwhile to eliminate these as the source of your problem at the beginning. Try your tablet with another set of headphones or speakers just to make sure that the problem is actually with the tablet.

The most likely cause of audio output problems on a DigiLand tablet is a damaged audio-out jack. If no audio comes out, check that the volume level is high enough. If that doesn't fix the issue, the audio jack might need replaced.

If the tablet is connected to a computer and the tablet doesn't recognize the connection, the issue is probably the motherboard.

The tablet either boots to a Windows logo and freezes or continuously reboots.

The Windows Operating System (OS) installed on you tablet might be corrupted. You will need to re-flash the device using a clean image of the Windows OS.

When trying to Skype or use a calling app, the party you are speaking with cannot hear you through the microphone.

If you can't be heard during a call, check the wiring from and to your microphone.

If the wiring to and from the microphone seems fine, you might need to replace your microphone.