Remove all 16 #10-torx screws from the back side of the case.

Gently separate the case pieces.

Unscrew the 4 #10-torx screws.

Unscrew the 2 Philips head screws

Peel off the pads.

Push the colored keys out from the other side.

Unscrew the red screws and pull the board out.

Then, unscrew the blue screws

Pull the bracket things off.

Pull out the pin.

Unscrew the 4 Philips head screws.

Unscrew these 2 Philips head screws.

Push from the other side until it comes out.

Take the spring off with the connector

Unscrew the 4 Philips head screws.

Peel off the contact pads.