Saeco Vienna Sup 018 Opening Procedure

crwdns2936071:01crwdne2936071:0 — Remove the attachments

Never forget: Pull the plug out!

crwdns2936071:02crwdne2936071:0 — Loosen bean container

The bean container is fixed with two Phillipps screws. Unscrew those. The adjusters of the mill and the coffee can remain.

crwdns2936071:03crwdne2936071:0 — Loosen screws

The lid is equipped with four screws, two at the bottom front, two at the back up. One is a Torx 10, the other cross-slot.

crwdns2936071:04crwdne2936071:0 — Lift the lid off

Now the cover can be lifted off. Pull backwards, then diagonally forward. Remove the silicone hose from the water tank.

crwdns2936071:05crwdne2936071:0 — Pull out the mechanical unit

On the work table, a cloth is laid, the machine is then placed on the back. The turntable may have to be pulled out on the ground eventually.

crwdns2936071:06crwdne2936071:0 — Repair

A view of the unit from behind. Above left the mill, in front of that the flowmeter. On the far left is the Ulka pump, in the middle of the boilers for the fast steam, among the gearbox with the engine. Right below the heater. Right up the control electronics