crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:02crwdnd2931529:0crwdne2931529:0
crwdns2935425:01crwdne2935425:0
crwdns2931653:01crwdne2931653:0
-
Heat an iOpener and lay it on the bottom edge of the screen to soften the glue securing it.
- | [* black] Turn off your Surface Book and detach the display. |
---|---|
- | [* black] [guide|25705|Heat and apply an iOpener|new_window=true] or use a hair dryer or heat gun to heat the perimeter of the display, in order to soften the glue securing it. |
- | [* black] Use a suction cup or [product|IF145-243-1|iSclack|new_window=true] or pull up on the edge of the display, and create a slight gap between the display glass and the frame. |
- | [* black] Insert an opening pick into the gap. |
- | [* icon_caution] Use only gentle force with the pick, and keep the display very hot (slightly too hot to touch). If you use too much force and/or allow the glue to harden, the glass will crack. |
+ | [* black] [guide|25705|Heat an iOpener|new_window=true] and lay it on the bottom edge of the screen to soften the glue securing it. |
+ | [* icon_note] You can also use a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true], but be careful as extreme heat can damage the screen and/or battery. |
crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0