crwdns2933423:0crwdne2933423:0

iMac Intel 21.5" Retina 4Kディスプレイの接着ストリップの交換

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:03crwdnd2931529:0crwdne2931529:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:02crwdne2931653:0
iMac Intel 21.5" Retina 4K Display Adhesive Strips Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 iMac Intel 21.5" Retina 4K Display Adhesive Strips Replacement: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
  • Before you start placing strips, remove all of the old adhesive around the perimeter of the rear enclosure.

  • If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

  • Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel upward towards the top of the device.

  • After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.

  • Don't skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

接着ストリップを準備する前に、リアエンクロージャーの周囲に残っている接着剤を全て綺麗に剥がしてください。

現在使用中のディスプレイを再利用する場合は、ディスプレイの裏側から古い接着剤も剥がさなければなりません。

指先やピンセットを使って、古い接着ストリップを剥がします。デバイス下側から剥がし始めて、上部に向けて上向きに引きながら剥がします。

古い接着剤を剥がしたら、90%濃度以上のイソプロピルアルコールをメガネ拭きのようなリントフリーの布に含ませて、接着剤部分エリアを綺麗に拭き取ります。前後に拭かず、同じ方向に拭いてください。

この手順をスキップしないでください。新しい接着ストリップが正しく装着できません。iMacからディスプレイが落下することがあります。

[* icon_caution] Before you start placing strips, remove all of the old adhesive around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
- [* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
+ [* black] Peel off the old strips of adhesive using [product|IF145-020|tweezers] or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
[* black] After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
[* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0