crwdns2933423:0crwdne2933423:0

iPhone 6sのバッテリーの交換

crwdns2935425:05crwdne2935425:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:05crwdne2931653:0
iPhone 6s Battery Replacement, Battery Removal: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
Battery Removal
  • Remove the battery.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a forced restart after reassembly. This can prevent several issues and simplify troubleshooting.

バッテリーを取り出します。

交換用バッテリーにプラスチック製のスリーブが付いている場合は、作業の前にスリーブをリボンケーブルから引き抜いてください。

デバイス内にアルコール溶液が残っている場合は、新しいバッテリーをインストールする前にきちんと拭き取るか、自然乾燥させてください。

交換用バッテリーを装着する前に、バッテリーコネクタをロジックボードのソケットに一時的に再接続してください。バッテリーが定位置に適切に配置されるか確認します。

バッテリーを接着したら接続を外して、デバイスの再組み立てを続行します。

交換用のバッテリーにプレインストールされた接着剤が付いていない場合は、このガイドを参照して接着ストリップを交換してください。

再組み立てが終わったら再起動を行ってください。これは今後起こりうる問題を防ぎ、トラブルシューティングを簡単にしてくれます。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0