How to clean with paper towel

Tear a single sheet of paper towel in half. Fold the sheet in half several times until it is about 1/2 inch wide.

Put a few drops of distilled water on top of the paper towel and lay it in the trough under the print head,. Move the print head over the towel and let it sit for at least 15 minutes. This will soften the ink on the print head.

Move print head assembly back to its resting position. You will probably notice that the paper towel now has one big black blob of ink on it. (There is so much excess ink on the print head that all the colors are mixing to make black.)

If you cannot clearly see individual colors, then dampen another spot on the paper towel and move the print head back over the newly dampened spot on the paper towel. Continue repeating this until you see all the individual colors.

*note: when reassembling be certain to move the print head back to its resting position (the extreme right side above the park carriage)