crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iPhone 16 Pro Max ロジックボードの交換

crwdns2931527:0crwdnd2931527:0crwdnd2931527:0crwdnd2931527:0crwdne2931527:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:03crwdne2931653:0
iPhone 16 Pro Max Logic Board Installation, Install the logic board: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
Install the logic board

  • You can't directly connect the display connector to the bottom of the logic board without removing the screen, but you might successfully connect it by screwing the logic board in place. Be sure to test your iPhone before you seal it up.

  • Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.

crwdns2935429:0crwdne2935429:0

スクリーンを取り外さなければ、ディスプレイコネクタをロジックボードの底面に直接接続できませんが、ロジックボードをネジ止めすることでうまく接続できます。

ロジックボードがネジの支柱に当たっていることを確認してください。この支柱によって、ボードの下にあるディスプレイコネクターとボードの位置が正しく合わさります。

バッテリーを再接続するまで、再組み立ての作業を続けます。iPhoneの電源を入れてみて、スクリーンが接続されているかどうかを確認します。スクリーンがオンにならない場合は、この修理ガイドに従って、ディスプレイコネクタを手動で再接続してください。

-[* icon_reminder] You can't directly connect the display connector to the bottom of the logic board without removing the screen, but you may successfully connect it by screwing the logic board in place.
- [* red] Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.
- [* black] Continue with reassembly until you've reconnected the battery. Try to power on the iPhone to see if the screen's connected. If the screen fails to turn on, follow the [guide|178634|screen guide|new_window=true] to manually reconnect the display connector.
+[title] Install the logic board
+[* icon_note] You can't ''directly'' connect the display connector to the bottom of the logic board without removing the screen, but you might successfully connect it by screwing the logic board in place. ***Be sure to test your iPhone before you seal it up.***
+[* red] Make sure the logic board rests in place against its screw posts. The posts will properly align the board to the display connector underneath it.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0