crwdns2935425:07crwdne2935425:0
-
With the battery pack removed from the earpiece surround, you can work on the battery pack disassembly.
-
Start by gently prying back the red tangs of the red sleeve and pushing the battery pack out of the housing. The read sleeve will slide off as well as a black silicone sleve.
-
To remove the PCB from the battery, carefully cut the double sided tape underneath the board on the side away from the soldered joint.
-
Once you are close enough to the solder joint and board is flexing a little, desolder while gently prying the board up and away. This may take several heat and flex cycles to fully pull it away. Repeat this process for the other side.
-
By this point, the PCB should be free of the battery.
crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0