crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

惠而浦干衣机湿度传感器测试和更换

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:03crwdne2931653:0
Whirlpool Dryer Moisture Sensor Testing and Replacement, Check continuity from strip to connector: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Whirlpool Dryer Moisture Sensor Testing and Replacement, Check continuity from strip to connector: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Whirlpool Dryer Moisture Sensor Testing and Replacement, Check continuity from strip to connector: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Check continuity from strip to connector

  • The next two steps will require a multimeter. If you aren't familiar with how to use one, here is a guide that will help you.

  • Set the multimeter to resistance (Ω) and check the continuity between the two metal strips and their respective ports located on the outside edges of the connector.

  • Trace the connector wires on the back of the module to match each port to a metal strip.

  • If the strips show continuity (less than 1 Ω) to the connector, go to the next step.

  • If either strip shows an open circuit (OL) to its connector, skip the next step.

检查条带与接口之间的连续性

接下来的两个步骤需要使用万用表。如果您不熟悉如何使用万用表，这里有一份指南会对您有所帮助。

将万用表调至电阻档 (Ω)，检查位于接口外缘的两个金属条和各自端口之间的连续性。

跟踪模块背面的接口导线，将每个端口与金属条匹配。

如果条带显示与接口导通（小于 1 Ω），则进入下一步。

如果任一接线板的连接器显示开路（OL），则跳过下一步。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0