crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iPhone 14 Plus 스크린 교체

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

iPhone 14 Plus Pentalobe/펜타로브/별나사 교체

여는 픽을 3mm에 표시하기

iPhone 14 Plus 스크린 선행작업

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936325:0crwdne2936325:0
    If your iPhone 14 Plus screen is cracked, not responding to touch, or not showing a picture when your phone is powered on, use this guide to restore your iPhone to working order with a new screen, a.k.a. display assembly.
    This guide was created using the ***A2886*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same.
    ***Note:***: On iOS 17.6 and earlier, True Tone and auto brightness functionality areis disabled after a screen replacement, even when using an original Apple screen. Face ID is also disabled, unless the iPhone runsis running iOS 15.2 or newer. On iOS 18 and newer, you can calibrate your new screen using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true] to restore True Tone functionality on genuine screens purchased from Apple.
    You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the frame and place the screen back in its original position.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — 전면 센서 브래킷 풀기

      나머지 단계는 전면 센서 어셈블리를 새 스크린으로 옮기는 방법을 보여줍니다. 교체용 스크린에 조립품이 사전 설치된 상태로 제공된다면 이 단계를 건너뛰세요.

      crwdns2936071:02crwdne2936071:0 — 전면 센서 브래킷 분리하기

      핀셋 또는 손가락을 사용하여 전면 센서 어셈블리 브래킷을 분리하세요.

      crwdns2936071:03crwdne2936071:0 — 전면 센서 어셈블리 가열하기

      iOpener를 가열하고 2분 동안 스크린 상단 가장자리에 적용하세요.

      crwdns2936071:04crwdne2936071:0 — 주변광 센서 연결 해제하기

      주변광 센서와 스크린의 홈 사이에 여는 픽을 끼우세요.

      crwdns2936071:05crwdne2936071:0 — 근접 센서 연결 해제하기

      근접 센서와 스크린의 홈 사이에 여는 픽을 끼우세요.

      crwdns2936071:06crwdne2936071:0 — 근접 센서 위치 변경하기

      핀셋 또는 손가락을 사용하여 근접 센서 케이블을 스크린에서 멀리 움직이세요.

      crwdns2936071:07crwdne2936071:0 — 마이크 연결 해제하기

      마이크에 가까운 마이크 케이블 밑에 여는 픽을 끼우세요 (금속 직사각형).

      crwdns2936071:08crwdne2936071:0 — 전면 센서 어셈블리 분리하기

      이 시점에서 접착제가 식었을 수 있습니다. 그렇다면 계속하기 전에 가열한 iOpener를 어셈블리에 1분 동안 적용하세요.

      crwdns2936071:09crwdne2936071:0

      전면 센서 어셈블리 분리하기

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0