Unihut Titan Pocket Keyboard Disassembly Guide

crwdns2936071:01crwdne2936071:0 — Side plates disassembly

Use a Torx T5 screwdriver to remove the 3 screws.

crwdns2936071:02crwdne2936071:0 — Back plate screws

Use a Torx T5 screwdriver to remove the 4 screws.

crwdns2936071:03crwdne2936071:0 — Back plate disassembly

Insert the opening pick into the gap between the body and the back plate. Then open the gap so that the latch comes out.

crwdns2936071:04crwdne2936071:0 — Bottom part disassembly

Remove the 3 screws using a Phillips #000 screwdriver.

crwdns2936071:05crwdne2936071:0 — Battery disassembly

Remove the battery connector.

crwdns2936071:06crwdne2936071:0 — Upper part disassembly

Remove the 2 screws using a Phillips #000 screwdriver.

crwdns2936071:07crwdne2936071:0 — Motherboard disassembly

Disconnect the 6 connectors.

crwdns2936071:08crwdne2936071:0 — Keyboard disassembly

Remove the 5 screws using a Phillips #000 screwdriver.

crwdns2936071:09crwdne2936071:0 — Keyboard disassembly

Remove the 17 plastic rivets to separate the board and keyboard.