crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Google Pixel 6 스크린 교체하기

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:06crwdnd2931529:0crwdne2931529:0

crwdns2935421:0crwdne2935421:0

crwdns2935425:014crwdne2935425:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936325:0crwdne2936325:0
crwdns2931653:014crwdne2931653:0
Google Pixel 6 Screen Replacement, Remove the screen: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
Remove the screen

  • Remove the screen.

  • During reassembly:

  • If you replaced the screen, check the front-facing camera hole on the screen and remove any remaining protective liners in it.

  • Remember to reinstall the display cable bracket.

  • This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, power off your phone and disconnect the screen.

  • Follow this guide if you're using custom-cut adhesives for your device.

  • Follow this guide if you're using a pre-cut adhesive card.

  • If you're installing a new screen, follow this guide to calibrate the fingerprint sensor.

스크린 분리하기

스크린을 분리하세요.

재조립 할 때, (90% 이상) 이소프로필 알코올로 해당 부위를 닦은 후 필요한 곳에 새 접착제를 바르세요.

기기에 맞게 맞춤 재단된 접착제를 사용하는 경우 이 안내서를 따르세요.

미리 재단된 접착 카드를 사용하는 경우 이 안내서를 따르세요.

교체용 스크린에서 모든 접착 라이너를 제거해야 합니다. 셀카 카메라 홈에서 라이너를 제거했는지 확인하세요.

스크린을 연결하고 휴대폰을 테스트하여 작동하는지 확인하세요. 부팅하는 동안 스크린이 보정 과정을 거치게 됩니다. 터치 보정이 잘못될 수 있으므로 이 과정에서 스크린을 만지지 마세요. 휴대폰의 전원을 다시 끄고 재조립을 계속하세요.

다른 지문 판독기를 설치하는 경우 판독기를 다시 보정해야 작동합니다.

[title] Remove the screen
[* black] Remove the screen.
-[* icon_reminder] During reassembly, apply new adhesive where it's necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
+[* icon_reminder] During reassembly:
+ [* black] If you replaced the screen, check the [link|https://guide-images.cdn.ifixit.com/igi/nODKyalnABkAMUO2.full|front-facing camera hole|new_window=true] on the screen and remove any remaining protective liners in it.
+ [* icon_note] ***Remember to reinstall the display cable bracket.***
+ [* black] This is a good point to test your phone before sealing it up. Temporarily connect your screen, power on your phone, and make sure it works as expected. Before continuing with reassembly, ***power off your phone and disconnect the screen***.
[* black] [guide|155288|Follow this guide|new_window=true] if you're using custom-cut adhesives for your device.
[* black] [guide|113604|Follow this guide|new_window=true] if you're using a pre-cut adhesive card.
-[* icon_caution] Be sure to remove all adhesive liners from your replacement screen. Check the selfie camera recess and make sure you've removed the liner there.
-[* icon_reminder] Connect the screen and test your phone to make sure it works. During the boot-up process, the screen will go through a calibration sequence. Don't touch the screen during this process, as it could result in improper touch calibration. Power the phone back down and continue reassembly.
-[* icon_reminder] If installing a different fingerprint reader, you will need to [link|https://pixelrepair.withgoogle.com/udfps|recalibrate the reader|new_window=true] before it will work.
+ [* black] If you're installing a new screen, follow [guide|166753|this guide|new_window=true] to calibrate the fingerprint sensor.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0